LB型不可抽式立式長軸透平泵

 LB型轉子不可抽式立式長軸透平泵産品概述

LB型不可抽式立式長軸透平泵適用于電廠、鋼廠、自來水公司、汙水處理廠、石油化工、礦山等工礦企業少妇AA毛片在线观看，以及市政給排水工程、農業灌溉、防洪排澇等工程一本道精品一区二区三区。可以用來輸送55℃以下的清水、雨水、鐵皮坑水、汙水以及海水等介質性一交一乱一欲A片无码人妻丰满熟妇啪啪欧美，流量範圍30-8400m³/h久久久这里只有精品加勒比国产农村熟妇出轨VIDEOS，揚程範圍10-200m国产农村熟妇出轨VIDEOS国产乱妇乱子在线播放视频一本道精品一区二区三区。特殊設計的輸送介質溫度可達90℃性一交一乱一欲A片。

流量範圍：50~8400m3/h  

揚程範圍：10~150m

Description

The said series pumps are used to transfer clear water,rain water,water in iron sheet pits,sewage and seawater,servicing in power plants,iron and steel works,water supply companies,sewage treatment plants,petroleum and chemical industries,mines as well as municipal water supply and drainage projects,farmlands irriagation,flood protection and drain waterlogged farmlands,etc..The temperature of pumped media is below 55℃ and reaches to 90℃ for special design. The flow rate ranges from 30 to 8400m³/h and the head—from 10 to 200m.

 

LB型不可抽式立式長軸透平泵産品特點

1、 運行平穩国产农村熟妇出轨VIDEOS，安全可靠亚洲少妇中文字幕特A反艳惜毛片性一交一乱一欲A片国产亚洲精品久久久网站好莱，免抽真空啓動国产亚洲精品久久久网站好莱，使用壽命周期長久久成人无码国产免费播放久久久这里只有精品加勒比。

2、 泵體積小久久久这里只有精品加勒比，基礎占地面積少国产农村熟妇出轨VIDEOS无码人妻丰满熟妇啪啪欧美，基礎以下泵長度可以調整亚洲少妇中文字幕特A反艳惜毛片一本道精品一区二区三区，適應性強国产农村熟妇出轨VIDEOS。

3、 流道簡單可靠国产亚洲精品久久久网站好莱无码人妻丰满熟妇啪啪欧美，節省泵房基建投資国产农村熟妇出轨VIDEOS亚洲少妇中文字幕特A反艳惜毛片性一交一乱一欲A片。

4、 結構合理无码人妻丰满熟妇啪啪欧美少妇AA毛片在线观看，裝拆方便国产乱妇乱子在线播放视频久久成人无码国产免费播放，維護檢修容易簡便性一交一乱一欲A片国产乱妇乱子在线播放视频。

5、 泵效率高国产亚洲精品久久久网站好莱，降低運行成本无码人妻丰满熟妇啪啪欧美久久成人无码国产免费播放。

Features

1. Operation smooth,safe and reliable,starting without exhausting vacumn,service life long.

2. The volumn of the pump small,less occupied land area, the length under foundation adjustable,applicability strong.

3. Flowing channel simple and reliable,saving the investment for construction of the pump house.

4. Structure reasonable,convenient for mounting and dismantling,,easy to maintain and inspect.

5. Efficiency high, operating cost reduced.

 

LB型不可抽式立式長軸透平泵型號說明

500LB—55.3Ⅰ(×2、3)

500——泵吐出口徑500mm

L———立式長軸透平泵

B———轉子不可抽芯

55.3———泵的設計揚程

Ⅰ———泵設計順序（第一次設計無標示）

×2———表示泵的級數爲2級

 

 500LB-55.3Ⅰ(×2、3)

 

 500—Outlet of the pump:500mm

 L---Vertical mixed flow pump

 B---Non pull-out rotor

55.3---Design head

Ⅰ---Pump design class(no mark when first time design)

 ×2-- Stage number

  

LB型轉子不可抽式立式長軸透平泵产品结构说明

簡圖一. LB型不可抽立式長軸透平泵結構簡圖(型式:ST) Sectional Arrangement Of Type LB(Type ST)

簡圖二.LB型立式長軸泵透平泵2級結構簡圖(型式:ST)Sectional Arrangement Of Type LB With Two Stages(Type ST)

1、 LB型立式長軸泵为立式单級（多級）离心式或斜流式带导叶体结构国产亚洲精品久久久网站好莱少妇AA毛片在线观看。

2、 泵的結構型式有泵吐出口在安裝基礎之上和之下(型式代號分別爲S和X)、泵承受軸向力和電機承受軸向力(型式代號分別爲T和D)、外接潤滑水和泵自身潤滑等形式国产亚洲精品久久久网站好莱国产农村熟妇出轨VIDEOS。

3、 泵安裝型式有濕坑式安裝或幹坑式安裝国产亚洲精品久久久网站好莱。

濕坑式安裝：泵下部浸沒在吸水池中久久成人无码国产免费播放。

幹坑式安裝：泵采用管道進水少妇AA毛片在线观看久久成人无码国产免费播放，泵吸入喇叭口與進水管道之間采用90°肘形進水彎管聯接国产乱妇乱子在线播放视频。

4、 泵軸承爲橡膠導軸承或賽龍導軸承性一交一乱一欲A片。

5、 泵口径在1000mm以下时一本道精品一区二区三区少妇AA毛片在线观看国产亚洲精品久久久网站好莱，泵转子一般为不可抽形式；泵轴向水推力及转子重量一般由泵本体推力轴承承受久久成人无码国产免费播放亚洲少妇中文字幕特A反艳惜毛片，泵和电机之间采用弹性联接；泵吐出口位于安装面基础之上（型式代号为ST的结构形式）无码人妻丰满熟妇啪啪欧美性一交一乱一欲A片国产农村熟妇出轨VIDEOS。如有要求亚洲少妇中文字幕特A反艳惜毛片一本道精品一区二区三区无码人妻丰满熟妇啪啪欧美，也可以由电机承受轴向水推力及转子重量；或其它结构形式的组合（型式代号为SD、XT、XD）;用户如有要求亚洲少妇中文字幕特A反艳惜毛片无码人妻丰满熟妇啪啪欧美， 也可以设计成可抽式结构形式性一交一乱一欲A片亚洲少妇中文字幕特A反艳惜毛片。泵口径在1000mm以上时国产亚洲精品久久久网站好莱，泵转子一般为可抽形式；泵轴向水推力及转子重量一般由电机推力轴承承受无码人妻丰满熟妇啪啪欧美国产农村熟妇出轨VIDEOS，泵和电机之间采用刚性联接；泵吐出口位于安装面基础之下（型式代号为XD）一本道精品一区二区三区久久久这里只有精品加勒比国产亚洲精品久久久网站好莱。如有要求少妇AA毛片在线观看性一交一乱一欲A片久久久这里只有精品加勒比，也可以由泵承受轴向水推力及转子重量；或其它结构形式的组合（型式代号为XT、SD、ST）久久成人无码国产免费播放。用户如有要求性一交一乱一欲A片， 也可以设计成不可抽式结构形式国产亚洲精品久久久网站好莱。

6、 泵本體承受軸向水推力及轉子重量時国产农村熟妇出轨VIDEOS性一交一乱一欲A片，泵推力軸承采用稀油潤滑亚洲少妇中文字幕特A反艳惜毛片少妇AA毛片在线观看久久成人无码国产免费播放，推力軸承部件帶Pt100測溫元件測軸承溫度或壓力式溫度計測潤滑油溫度国产亚洲精品久久久网站好莱国产农村熟妇出轨VIDEOS性一交一乱一欲A片。

7、 泵軸向密封采用填料密封一本道精品一区二区三区。

8、 在泵安裝基礎上可以進行葉輪與葉輪室（轉動部分與靜止部分）之間間隙的調整国产农村熟妇出轨VIDEOS久久久这里只有精品加勒比国产乱妇乱子在线播放视频，操作方便性一交一乱一欲A片无码人妻丰满熟妇啪啪欧美国产亚洲精品久久久网站好莱。

9、 從吐出方向往泵看无码人妻丰满熟妇啪啪欧美，電機接線盒與泵外接潤滑水接管位于左側国产乱妇乱子在线播放视频。也可根據用戶要求久久久这里只有精品加勒比国产乱妇乱子在线播放视频国产亚洲精品久久久网站好莱，布置在其它方位国产农村熟妇出轨VIDEOS久久成人无码国产免费播放久久久这里只有精品加勒比。

Structure feature:

1.   Series LB pumps are of vertical single stage and/or multistage centrifugal or     mixed flow with diffuser types.

2.   The following structure types are available for the pump:the discharge opening above and/or under the mounting foundation(Type Code named S and X respectively);the axial thrust force born by the pump and/or by the motor(Type Code named T and D);lubricating water from outside and/or from the pump itself.

3.   The intake sump is of wet pit and/or dry pit types.

Wet pit type:lower part of the pump inundated in the intake sump.

Dry pit type:the water enters into the pump,the suction bellmouth is connected with the inlet  pipe of the pump by means of elbow bend pipe of 90.

4.   Rubber guide bearings and /or the Thordon guide bearings are available for  bearings of the pump.

5.   Generally when the nozzle diameter of the pump is under 1000mm , non pull-out type is adopted for the rotor and the discharge opening is above the mounting foundation(Type Code named ST). In this case the axial thrust force and the weight of the rotor are usually born by thrust bearings of the pump itself and  flexible connection is adopted between the pump and the motor.The thrust force and the weight of the rotor can also be born by the motor if required,or other structure types such as SD,XT,XD are available .Rotor pull-out type can also be adopted if required by clients.

Generally when the discharge diameter of the pump is above 1000mm, pull-out type is adopted for the rotor and the discharge opening is under the mounting foundation(Type Code named XD).In this case the axial thrust force and the weight of the rotor are usually born by thrust bearings of the motor and rigid connection is adopted between the pump

and the motor. The axial thrust force and the weight of the rotor can also be born by

the pump if required,or other structure types such as XT,SD,ST are available .Rotor non pull-out type can also be adopted if required by clients.  

6.   When the axial thrust force and the weight of the rotor are born by pump itself,the thrust bearing of the pump is lubricated with dilute oil and is equipped with a temperature detector Pt100 to detect bearing temperature and a pressure type thermometer to detect the temperature of lubricating oil.

7.   The antielectrochemical corrosion appliance is adopted for the part of the pump contacting the liquid to ensure the service life of the pump when seawater is pumped.

8.   The packing seal is adopted for the axial seal of the pump.

9.   The clearance between the impeller and the impeller chamber,i.e.the rotating component and the static component,can be easily adjusted on the pump mounting foundation.

LB型不可抽式立式長軸透平泵産品主要零部件材質Materials Of Major Parts

介質 Media 零件 Parts	清水 Clear water	海水 Seawater	汙水（含磨料） Sewage（incl.of abrasiv powder）
吐出彎管 Discharge elbow 中間接管（外、內） Intermediate column  (internal & external)	Q235-A	HT200Ni2Cr 0Cr18Ni9 ZG0Cr18Ni12Mo2	Q235-A
導葉、吸入喇叭口 Guide vane, Suction bellmouth	HT200	HT200Ni2Cr ZG0Cr18Ni9 ZG0Cr18Ni12Mo2	HT200、QT500-7 ZG1Cr13Ni1
葉輪 Impeller	ZG1Cr13Ni1 HT200	ZG0Cr18Ni9 ZG0Cr18Ni12Mo2	QT500-7 ZG1Cr13Ni1
葉輪室、密封环 Shroud,wearing ring	HT200 ZG2Cr13	ZG0Cr18Ni9 ZG0Cr18Ni12Mo2	ZG1Cr13Ni1 QT500-7
主軸 Main shaft	45、2Cr13	2Cr13、0Cr18Ni9 0Cr18Ni12Mo2	45、2Cr13 1Cr18Ni9
軸套 Shaft sleeve	45,2Cr13	2Cr13、0Cr18Ni9 ZG0Cr18Ni12Mo2	2Cr13、1Cr18Ni9
導軸承 Guide bearing	HT200+耐磨橡膠 HT200+abrasive rubber HT200+賽龍 HT200+Thordon bearing	HT200+耐磨橡膠 HT200+abrasive rubber HT200+賽龍 HT200+Thordon bearing	HT200+耐磨橡膠 HT200+abrasive rubber HT200+賽龍 HT200+Thordon bearing

注：根据用户具体使用要求国产乱妇乱子在线播放视频，可另选其它适合材质一本道精品一区二区三区。铸铁材质葉輪只适用于闭式葉輪久久成人无码国产免费播放。

Remarks:Other materials are  available at the request of clients.Cast iron is suitable only for closed type impeller.

LB型不可抽式立式長軸透平泵型谱图

LB型立式長軸透平泵外形尺寸圖(基本型式XD)

 

 

 

 

-疯狂做受XXXX高潮A片人妻精品久久久久中文字幕69久久WWW免费人成一看片