LK型可抽式立式長軸泵

Vertical Mixed Flow Pump

LK型转子可抽式立式長軸泵産品概述

LK型可抽式立式長軸泵適用于電廠、鋼廠、自來水公司、汙水處理廠、石油化工、礦山等工礦企業日本老太做爰XX0LD国产丰满大乳大屁股A片图片欧美牲交A欧美牲交aⅴ久久，以及市政給排水工程、農業灌溉、防洪排澇等工程成人在无码AV在线观看一。可以用來輸送55℃以下的清水、雨水、鐵皮坑水、汙水以及海水等介質蜜芽国内精品视频在线观看免费视频久久国产丰满大乳大屁股A片图片，流量範圍30-70000m3/h国产丰满大乳大屁股A片图片，揚程範圍7-200m免费视频久久。特殊設計的輸送介質溫度可達90℃日本一道二本免费。

Description

The said series pumps are used to transfer clear water,rain water,water in iron sheet pits,sewage and seawater,servicing in power plants,iron and steel works,water supply companies,sewage treatment plants,petroleum and chemical industries,mines as well as municipal water supply and drainage projects,farmlands irriagation,flood protection and drain waterlogged farmlands,etc..The temperature of pumped media is below 55⁰C and reaches to 90⁰C for special design. The flow rate ranges from 30 to 20000m³/h and the head—from 7 to 200m.

LK型可抽式立式長軸泵産品特點

1、 運行平穩日本老太做爰XX0LD免费视频久久欧美牲交A欧美牲交aⅴ久久，安全可靠欧美牲交A欧美牲交aⅴ久久成人在无码AV在线观看一9999少妇AAAA片毛片，免抽真空啓動免费视频久久人人澡超碰碰97碰碰碰，使用壽命周期長免费视频久久国产丰满大乳大屁股A片图片成人在无码AV在线观看一。

2、 泵體積小国产丰满大乳大屁股A片图片日本一道二本免费，基礎占地面積少日本老太做爰XX0LD欧美牲交A欧美牲交aⅴ久久少妇人家摄像小毛片aa，基礎以下泵長度可以調整欧美牲交A欧美牲交aⅴ久久，適應性強少妇人家摄像小毛片aa。

3、 流道簡單可靠少妇人家摄像小毛片aa，節省泵房基建投資国产丰满大乳大屁股A片图片免费视频久久。

4、 結構合理人人澡超碰碰97碰碰碰国产丰满大乳大屁股A片图片日本老太做爰XX0LD，裝拆方便9999少妇AAAA片毛片，維護檢修容易簡便国产丰满大乳大屁股A片图片9999少妇AAAA片毛片。

5、 泵效率高蜜芽国内精品视频在线观看，降低運行成本日本一道二本免费少妇人家摄像小毛片aa成人在无码AV在线观看一。

Features

1. Operation smooth,safe and reliable,starting without exhausting vacumn,service life long.

2. The volumn of the pump small,less occupied land area, the length under foundation adjustable,applicability strong.

3. Flowing channel simple and reliable,saving the investment for construction of the pump house.

4. Structure reasonable,convenient for mounting and dismantling,,easy to maintain and inspect.

5. Efficiency high, operating cost reduced.

LK型可抽式立式長軸泵型號說明

1400LK-30Ⅰ                                 500LB-55.3Ⅰ(×2、3)

1400—Outlet of the pump:1400mm              500—Outlet of the pump:500mm

L----Vertical mixed flow pump               L---Vertical mixed flow pump

K----Pull-out rotor                         B---Non pull-out rotor

30---Design head                            55.3---Design head

Ⅰ---Pump design class(no mark when         Ⅰ---Pump design class(no mark when

first time design)                         first time design)

Remarks: multistage type is usually         ×2-- Stage number

Not designed for the pump of large

nozzle diameter.

産品結構說明

简图一. LK型立式長軸泵结构简图(型式ST)

简图二. LK型立式長軸泵结构简图(型式XD)

1、 LK型可抽式立式長軸泵为立式单级（多级）离心式或斜流式带导叶体结构欧美牲交A欧美牲交aⅴ久久。

2、 泵的結構型式有泵吐出口在安裝基礎之上和之下(型式代號分別爲S和X)、泵承受軸向力和電機承受軸向力(型式代號分別爲T和D)、外接潤滑水和泵自身潤滑等形式蜜芽国内精品视频在线观看日本一道二本免费人人澡超碰碰97碰碰碰。

3、 泵安裝型式有濕坑式安裝或幹坑式安裝日本老太做爰XX0LD9999少妇AAAA片毛片。

濕坑式安裝：泵下部浸沒在吸水池中蜜芽国内精品视频在线观看免费视频久久。

幹坑式安裝：泵采用管道進水蜜芽国内精品视频在线观看，泵吸入喇叭口與進水管道之間采用90°肘形進水彎管聯接欧美牲交A欧美牲交aⅴ久久。

4、 泵軸承爲橡膠導軸承或賽龍導軸承欧美牲交A欧美牲交aⅴ久久蜜芽国内精品视频在线观看。

5、 泵口径在1000mm以下时免费视频久久人人澡超碰碰97碰碰碰，泵转子一般为不可抽形式；泵轴向水推力及转子重量一般由泵本体推力轴承承受免费视频久久欧美牲交A欧美牲交aⅴ久久蜜芽国内精品视频在线观看，泵和电机之间采用弹性联接；泵吐出口位于安装面基础之上（型式代号为ST的结构形式）9999少妇AAAA片毛片欧美牲交A欧美牲交aⅴ久久。如有要求国产丰满大乳大屁股A片图片日本老太做爰XX0LD日本一道二本免费，也可以由电机承受轴向水推力及转子重量；或其它结构形式的组合（型式代号为SD、XT、XD）;用户如有要求少妇人家摄像小毛片aa日本老太做爰XX0LD9999少妇AAAA片毛片， 也可以设计成可抽式结构形式人人澡超碰碰97碰碰碰。泵口径在1000mm以上时欧美牲交A欧美牲交aⅴ久久免费视频久久，泵转子一般为可抽形式；泵轴向水推力及转子重量一般由电机推力轴承承受免费视频久久日本一道二本免费，泵和电机之间采用刚性联接；泵吐出口位于安装面基础之下（型式代号为XD）蜜芽国内精品视频在线观看。如有要求欧美牲交A欧美牲交aⅴ久久9999少妇AAAA片毛片日本一道二本免费，也可以由泵承受轴向水推力及转子重量；或其它结构形式的组合（型式代号为XT、SD、ST）欧美牲交A欧美牲交aⅴ久久少妇人家摄像小毛片aa。用户如有要求日本老太做爰XX0LD， 也可以设计成不可抽式结构形式日本一道二本免费。

6、 泵本體承受軸向水推力及轉子重量時日本一道二本免费，泵推力軸承采用稀油潤滑成人在无码AV在线观看一蜜芽国内精品视频在线观看，推力軸承部件帶Pt100測溫元件測軸承溫度或壓力式溫度計測潤滑油溫度蜜芽国内精品视频在线观看欧美牲交A欧美牲交aⅴ久久日本老太做爰XX0LD。

7、 泵軸向密封采用填料密封少妇人家摄像小毛片aa。

8、 在泵安裝基礎上可以進行葉輪與葉輪室（轉動部分與靜止部分）之間間隙的調整日本一道二本免费，操作方便少妇人家摄像小毛片aa免费视频久久欧美牲交A欧美牲交aⅴ久久。

9、 從吐出方向往泵看少妇人家摄像小毛片aa，電機接線盒與泵外接潤滑水接管位于左側成人在无码AV在线观看一。也可根據用戶要求蜜芽国内精品视频在线观看日本一道二本免费，布置在其它方位日本一道二本免费成人在无码AV在线观看一少妇人家摄像小毛片aa。

Structure feature:

1.   Series LK ,LB pumps are of vertical single stage and/or multistage centrifugal or     mixed flow with diffuser types.

2.   The following structure types are available for the pump:the discharge opening above and/or under the mounting foundation(Type Code named S and X respectively);the axial thrust force born by the pump and/or by the motor(Type Code named T and D);lubricating water from outside and/or from the pump itself.

3.   The intake sump is of wet pit and/or dry pit types.

Wet pit type:lower part of the pump inundated in the intake sump.

Dry pit type:the water enters into the pump,the suction bellmouth is connected with the inlet  pipe of the pump by means of elbow bend pipe of 90⁰.

4.   Rubber guide bearings and /or the Thordon guide bearings are available for  bearings of the pump.

5.   Generally when the nozzle diameter of the pump is under 1000mm , non pull-out type is adopted for the rotor and the discharge opening is above the mounting foundation(Type Code named ST). In this case the axial thrust force and the weight of the rotor are usually born by thrust bearings of the pump itself and  flexible connection is adopted between the pump and the motor.The thrust force and the weight of the rotor can also be born by the motor if required,or other structure types such as SD,XT,XD are available .Rotor pull-out type can also be adopted if required by clients.

Generally when the discharge diameter of the pump is above 1000mm, pull-out type is adopted for the rotor and the discharge opening is under the mounting foundation(Type Code named XD).In this case the axial thrust force and the weight of the rotor are usually born by thrust bearings of the motor and rigid connection is adopted between the pump

and the motor. The axial thrust force and the weight of the rotor can also be born by

the pump if required,or other structure types such as XT,SD,ST are available .Rotor non pull-out type can also be adopted if required by clients.  

6.   When the axial thrust force and the weight of the rotor are born by pump itself,the thrust bearing of the pump is lubricated with dilute oil and is equipped with a temperature detector Pt100 to detect bearing temperature and a pressure type thermometer to detect the temperature of lubricating oil.

7.   The antielectrochemical corrosion appliance is adopted for the part of the pump contacting the liquid to ensure the service life of the pump when seawater is pumped.

8.   The packing seal is adopted for the axial seal of the pump.

9.   The clearance between the impeller and the impeller chamber,i.e.the rotating component and the static component,can be easily adjusted on the pump mounting foundation.

LK型可抽式立式長軸泵産品主要零部件材質Materials Of Major Parts

注：根据用户具体使用要求9999少妇AAAA片毛片成人在无码AV在线观看一，可另选其它适合材质日本老太做爰XX0LD少妇人家摄像小毛片aa。铸铁材质葉輪只适用于闭式葉輪蜜芽国内精品视频在线观看欧美牲交A欧美牲交aⅴ久久。

Remarks:Other materials are  available at the request of clients.Cast iron is suitable only for closed type impeller.

LK型可抽式立式長軸泵型谱图

LK型長軸泵外形尺寸圖(基本型式XD)